Wire Rope Clamp Eureka

General: Wire rope clamp is approved for lifting if assembly is carried out according to instruction manual. The wire rope clamp is to be used with 6 and 8 strand steel wire ropes with steel or fibre core with tensile strength up to 1960 N/mm2. Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).
Design: 2101-2102 casted, 2103-2108 dropforged.
Finish: 2101-2102 zinc-plating, 2103-2108 hot dip galvanizing.

WARNING!In case the clamps half-parts tangent each other when tightening the screws, a smaller EUREKA wire clamp shall be used.

Note: Wire ropes for general applications with fiber or steel core with max strenght of 1960 N/mm2. Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.

Important: Follow the fitting instructions in the user manual before use.

Art NoCodeRope Ø No of clamps
Screw

Moment

LengthOuter ØWeight
mmwhen liftingNumber pcs.Ø mmNmmmmmkg/100
10.17503200521014-5225627226,5
10.1750320062102622615422814
10.1750320082103822618503324
10.17503201021049-1022830634252
10.17503201121051122830624352
10.175032013210612-13221070824880
10.17503201421071422107010650115
10.175032016210815-16221211510062170