General: This type of lifting beam is designed as a folding crossbeam. The lifting beam is designed with a double pullout per arm, allowing the attachment points to be adjusted in the length/width. A 4-part sling must be used between the lifting beam and the crane hook. Other lengths and working loads can be manufactured upon request.
Design: Lightweight welded beam construction providing good torsional stiffness. TRIPLEX model K is special designed to fit in the side direction of a truck.
Proof load: Usually 1,5 x WLL.

  • Material: Beam and plate of high-strength structural steel.
  • Marking: Working load limit (WLL), CE marking, manufacturer, serial number, year of manufacturing, etc.
  • Finish: Yellow painted. Other treatments available on request.
  • Note: Top sling, separate slings and other accessories to be ordered separately.
Beam_heli-triplex_spec
Double pull-out
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Type Beam length L Min. (m) Beam length L Max. (m) L 1 max. (mm) L 1 max. (mm) Weight
kg
CAD
13.4065-02504200 2.5 Triplex 2,5 3,6 6,0 4,265 196
13.4065-06004510 6 Triplex 6K 2,30 4,65 3,250 197
13.4065-06004500 6 Triplex 6 3,9 6,5 4,520 239
13.4065-10004510 10 Triplex 10K 2,25 4,4 3,160 285
13.4065-10004500 10 Triplex 10 4,0 6,4 4,525 343
13.4065-20004510 20 Triplex 20K 2,25 4,4 3,160 465
13.4065-20004500 20 Triplex 20 4,0 6,4 4,545 591
The WLL stated in the table is based on a maximum top swing angle og 90°.

Download CAD

Description

Get CAD
Download