General: Stobitex PU-Elastomer sharp edge protection plates DF can be used wherever there are sharp edges to be protected or where damage to lifting materials needs to be prevented. The protective plates are applied during the load fastening / lashing operation. The lashing belt is threaded through the two openings, so that the plate can slide freely along the belt. During the lashing process the belt can thus slide over the plate, avoiding damage due to no direct contact between the belt and sharp edges.
The minimum thickness “d” recommended to afford good cut protection is 4 mm.

Plates can be supplied in all sizes, with the standard sizes are listed in the table.
  • Material: Polyurethan-Elastomer.
KANTENSCHUTZ-1
KANTENSCHUTZ-1
Select a row from the table below, then click the add to quote button
Art No Type Length x Width (mm) Recess a x b mm Weight
kg
CAD
12.40DF025 DF 25 250 x 80 25 x 10 0.11
12.40DF035 DF 35 250 x 80 35 x 10 0.12
12.40DF055 DF 55 300 x 100 55 x 10 0.17
12.40DF060 DF 60 450 x 100 60 x 30 0.26
12.40DF070 DF 70 450 x 120 70 x 30 0.3
12.40DF080 DF 80 450 x 120 80 x 30 0.31
12.40DF090 DF 90 470 x 130 90 x 40 0.33
12.40DF110 DF 110 470 x 150 110 x 40 0.4
12.40DF130 DF 130 470 x 170 130 x 40 0.43
12.40DF160 DF 160 470 x 200 160 x 40 0.48
12.40DF200 DF 200 470 x 240 200 x 40 0.54
12.40DF220 DF 220 470 x 240 220 x 40 0.57
12.40DF250 DF 250 500 x 280 250 x 40 0.7
12.40DF320 DF 320 600 x 400 320 x 40 1.33
12.40DF420 DF 420 600 x 500 420 x 40 1.93

Download CAD

Description

Get CAD
Download