• Not for lifting

Proof: 2 x WLL.

Standard: DIN 582.

User information
Eyebolts/eyenuts to this standard are intended as permanent attachments on equipment such as motors, control cabinets, gear boxes, etc.

The values given for eyebolts/eyenuts used with double-strand slings (cf. table line 2) apply only if the angle between each sling branch and the vertical does not exceed 45°. Larger angles and any lateral loading of eyebolts/eyenuts should be avoided.

  • Material: Steel C15E.
  • Marking: WLL, manufacturer C15, thread & CE
  • Finish: Electro galvanized.
  • Warning: The lifting eyes shall be screwed tight against the surface. When two lifting eyes are used their mutual position shall result in the two eyes at the same level. Larger angle between the slings than 90° are not tolerated. Lifting eyes can not be assembled against a surface that differ essentially from a surface perpendicular to the direction of the lift.
  • Safety factor: 4:1.
9408m_e
9408mm_lom_225mm
Select a row from the table below, then click the add to quote button
Art No WLL
Ton
Thread D (mm) L (mm) S (mm) T (mm) Weight
kg
CAD
11.56RM08 0.14 M8 20 36 8 20 0.05
11.56RM10 0.23 M10 25 45 10 25 0.09
11.56RM12 0.34 M12 30 53 12 30 0.16
11.56RM16 0.7 M16 35 62 14 35 0.24
11.56RM20 1.2 M20 40 71 16 40 0.36
11.56RM24 1.8 M24 50 90 20 50 0.72
11.56RM30 3.2 M30 65 109 24 60 1.3
11.56RM36 4.6 M36 75 128 28 70 2.1
11.56RM42 6.3 M42 85 147 32 80 3.1
11.56RM46 8.6 M48 100 168 38 90 5
Other dimensions, and type of thread on request.

Download CAD

Description

Get CAD
Download

Load Chart

 
  WLL (ton)
M8 0.14 0.095
M10 0.23 0.17
M12 0.34 0.24
M16 0.7 0.5
M20 1.2 0.83
M24 1.8 1.27
M30 3.2 2.6
M36 4.6 3.7
M42 6.3 5
M48 8.6 6.1