pewag

General: A revolutionary lifting eye which, thanks to the patented system with the red latches (see images) can be mounted by hand (latches in the upright position) and then freely rotate 360° around its own axis after installation (latches in the down position). The eye can be loaded within a range of 180°. The eye can be used individually or in combination with multiple eyes and should be tightened only by hand. This version of PLGW is used in those areas where a threaded bolt on the load is used instead of a simple thread. there is also the possibility to mount the lifting point PLGW-SN with a commercially available (standard) screw through the clearance hole. The benefit with the eye nut is that no matter the width of the load, the same lifting points ca be used. All you need are standard screws with different screw lenghts.

  • Material: Alloy steel grade 10.
  • Marking: WLL, and an individual serial number.
  • Finish: Painted.
  • Standard: EN 1677-1
  • Safety factor: 4:1
  • Grade: 10
Image
Image
plgw_SN_head
Do_not_PLGW_SN
PLGW_SN_dgw
Select a row from the table below, then click the add to quote button
Art No Code WLL Ton A (mm) B (mm) C (mm) D (mm) e (mm) Ø f (mm) Thread Weight kg
11.428441 PLGW-SN 0,3 t 0.3 25 45 10 21 55 35 M8 0.17
11.428449 PLGW-SN 0,5 t 0.5 25 45 10 21 55 35 M10 0.17
11.4298185 PLGW-SN 4,9 t 4.9 60 110 25 47 115 90 M30 2
11.4298428 PLGW-SN 0,7 t 0.7 30 55 12 25 65 43 M12 0.28
11.4298783 PLGW-SN 1,5 t 1.5 35 64 14 29 72 50 M16 0.42
11.4298784 PLGW-SN 2,3 t 2.3 40 69 16 34 80 54 M20 0.5
11.4298785 PLGW-SN 3,5 t 3.5 50 86 18 40 95 69 M24 1

Load diagram

Method of lifting


 
 
Number of legs
1
1
2
2
2
2
3+4
3+4
2
3+4
 
 
Angle of inclination
90°
90°
0°-45°
45°-60°
0°-45°
45°-60°
asymm.
asymm.
 
Code
Thread
Load capacity tons
mm
 
 
 
 
 
 
 
 
 
PLGW-SN 0,3 t
M8
1,0
0,3
2,0
0,6
0,4
0,3
0,6
0,4
0,3
0,3
12
PLGW-SN 0,5 t
M10
1,5
0,5
3,0
1
0,7
0,5
1
0,7
0,5
0,5
12
PLGW-SN 0,7 t
M12
2
0,7
4
1,4
1
0,7
1,4
1
0,7
0,7
14
PLGW-SN 1,5 t
M16
4
1,5
8
3
2,1
1,5
3
2,2
1,5
1,5
19
PLGW-SN 2,3 t
M20
5
2,3
10
4,6
3,2
2,3
4,8
3,4
2,3
2,3
22
PLGW-SN 3,5 t
M24
6,5
3,5
13
7
4,9
3,5
7,4
5,2
3,5
3,5
27
PLGW-SN 4,9 t*
M30
12
4,9
24
9
6,9
4,9
10,3
7,3
4,9
4,9
36