Powertex

Design: Jaw-jaw. Delievered complete with locking nuts. For adjustment of the length at number 1420 and 1421 the hole (h) is replaced with a key grip in both sides of the socket.

  • Material: General construction steel 4.6, split in stainless steel AISI 304.
  • Marking: POWERTEX, WLL xxT, batch number**.
  • Finish: Hot dip galvanized, except from M6 and M8, which are electro galvanized.
  • Warning: The turnbuckles are normally not intended for lifting. If they are to be used for lifting every individual turnbuckle shall be proof loaded, this is made on request. The turnbuckles are not allowed to be ajusted in length when they are used for lifting!
  • Safety factor: 5:1.
1402_e_225mm
1400_m_lom_225mm
Select a row from the table below, then click the add to quote button
Art No Code WLL Ton A (mm) B (mm) C (mm) D (mm) E (mm) G (mm) h (mm) L min. L max. Thread Weight kg
11.50PRSJ002 1,402 0.2 19 7 16 M5 100 12 6,5 180 255 M6 0.13
11.50PRSJ003 1,403 0.32 23 9 22 M6 108 14 8,5 210 285 M8 0.25
11.50PRSJ005 1,404 0.5 20 10 16 M8 150 18 7 225 335 M10 0.3
11.50PRSJ007 1,406 0.7 25 13 25 M10 195 24 8 315 470 M12 0.65
11.50PRSJ012 1,408 1.2 34 18 38 M12 230 31 8 380 565 M16 1.25
11.50PRSJ015 1,409 1.5 36 20 42 M16 270 39 12 450 660 M20 2.2
11.50PRSJ022 1,410 2.2 44 25 50 M20 295 46 12 500 720 M22 3.3
11.50PRSJ032 1,411 3.2 51 28 54 M22 325 52 12 555 800 M24 4.6
11.50PRSJ048 1,413 4.8 62 38 71,5 M27 370 60 12 700 970 M33 8.5
11.50PRSJ060 1,415 6 79 45 83,5 M33 400 75 16 780 1,060 M39 15
11.50PRSJ085 1,417 8.5 94 50 86 M39 400 85 16 800 1,050 M45 21
11.50PRSJ110 1,419 11 98 58 97,5 M45 400 92 16 870 1,100 M52 24
11.50PRSJ150 1,420 15 110 60 125 48 540 120 NV80 1,010 1,410 M56 48
11.50PRSJ250 1,421 25 132 72 145 56 720 140 NV90 1,250 1,820 M64 69
Other dimensions and preformance on request.