General: Wire rope clamp is approved for lifting if assembly is carried out according to instruction manual. The wire rope clamp is to be used with 6 and 8 strand steel wire ropes with steel or fibre core with tensile strength up to 1960 N/mm2. Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).
Design: 2101-2102 casted, 2103-2108 dropforged.


WARNING: In case the clamps half-parts tangent each other when tightening the screws, a smaller EUREKA wire clamp shall be used.

Note: Wire ropes for general applications with fiber or steel core with max strenght of 1960 N/mm2. Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.
Follow the fitting instructions in the user manual before use.
 

  • Finish: 2101-2102 zinc-plating, 2103-2108 hot dip galvanizing.
Eureka wirelåse new
Select a row from the table below, then click the add to quote button
Art No Code Length (mm) screw Ø - (mm) Outer Ø (mm) Diameter (mm) No of clamps when lifting Screw Number pcs. Moment Nm Weight kg/100pcs
10.175032005 2,101 27 5 22 4-5 2 2 6 6.5
10.175032006 2,102 42 6 28 6 2 2 15 14
10.175032008 2,103 50 6 33 8 2 2 18 24
10.175032010 2,104 63 8 42 9-10 2 2 30 52
10.175032011 2,105 62 8 43 11 2 2 30 52
10.175032013 2,106 82 10 48 12-13 2 2 70 80
10.175032014 2,107 106 10 50 14 2 2 70 115
10.175032016 2,108 100 12 62 15-16 2 2 115 170